Showing posts with label Granny. Show all posts
Showing posts with label Granny. Show all posts

Sunday, January 11, 2015

Sweet and Special Soapies


Today a little lesson about how to make a "soapie" - my own invented word.

To me, a soapie is a little cotton crochet holder for a small bar of soap.  It can be used in the shower as a soapy scrubber or alternatively as a drawer sachet.  The holder is made from 100% cotton yarn so even if it's used in the shower, it should hold up decently well and can probably be popped in the wash if need be.

This soapie is made so that the soap can be replaced either when it's been all used up in the shower or it's lost its scent in the drawer.  Don't toss the soap that's lost its scent as the unscented soap may no longer work in the sachet, but can still get you clean in the shower.

I made the holders to fit a box of small square soaps that I purchased at Trader Joe's before the holidays.  The soaps came in three neutral colors and were all scented Lemon Verbena.  The small giveaway soaps that you find in hotel rooms or B&Bs would also fit in these little holders, maybe not EXACTLY but certainly a good enough fit.

Three out of the four holders have buttons.  I left one without a button in case its owner opted do use it in the shower and didn't like the idea of having a button on their body scrubber.

Here's how I made them: (I used Knit Picks Dishie yarn and a size H (5mm) hook)

Step 1: Find a pattern for a small crochet square.  I chose THIS PATTERN.  You may want to have a wander through my pinterest board "Crochet Granny and Squares."  I selected a pattern that would result in the approximate size square to fit my soaps.  The pattern I selected had three rounds and in all cases, I did the first two rounds of my square in the same color and then changed to another color to complete the third round and do the joining.

Step 2: Make TWO squares from your pattern.  They can of course be identical or a mix-matched colors but they should be the exact same size.

Step 3: Hold the two wrong sides together.  Then starting on the upper left side of your sandwiched squares, single crochet around 3 sides.  Go through both loops of crochet and through both squares (that's going through a total of 4 loops) Do not cut the yarn.  It doesn't matter which corner you start in to join the squares, as long as you go in the direction of the arrows and don't finish off your yarn when you've joined the third side.


When I joined, I made two sc in the first corner where I started.  Then, I made one sc in each side stitch of the final round of my square.  When I got to the bottom corners, I made 3sc in each corner.  You may need to modify how many stitches you use in your joining based on the pattern you choose for your square.

Step 4: With the remaining 4th side open, sc across the top of the front square only.


In the photo above you can see that the soap is inserted into the open 4th side of the squares - the one that's not joined.  The arrows indicate where I single crocheted just across that top open edge of the front square.

Step 5: Continue single crocheting around the corner and then across the top open edge of the back square.  If you don't want to add a button loop, just continue around to the corner of the front square.  Finish off and weave in all ends of your joining yarn.  If you didn't weave in the ends of your squares at an earlier time, you can flip your entire soapie inside out and complete that task.

Step 6:  Optional.  If you intend to add one or two button loops to your soapie, you'll want to complete step 5 just a tad differently.


You can see the buttons that hold closed the top of the soapie in the photo above.

To create a button loop (or loops) see the diagram below.


My diagram is not accurate in terms of the number of stitches I show and in the fact that my front square has a bunch more stitches than the back square - the two squares will have the same number of stitches.  I just wanted to show how to skip a stitch and instead make 3 chain stitches to form a button loop.  Obviously if you need to make more than one button loop, you will need to space out where to make them along your square and then skip a stitch for each loop and add 3 chains above the skipped stitch.  Hopefully that is not too confusing.  I didn't photograph my process while I made the little soapie so I had to resort to the diagram instead.


I'm sure you could also insert a round soap into this little pouch.  Or, you could make a larger rectangle shape and join two of those together to cover a full sized bar of soap.

Last Christmas I made a bunch of little draw string soap holders for a standard sized bar of soap - you can see my post about those by clicking here.

Enjoy - Sher!

PS.  Next up - the Rainbow Trellis blanket (a photo tutorial of a blanket pattern I created - free of course as all the fly the coop crafts blog patterns are!)

Thursday, February 28, 2013

Granny Patchwork Blanket Reveal

Here is the TA DAH moment for my Granny Patchwork Blanket.




And one a bit more full view.  The blanket is stretched out on my queen sized bed to give you a bit of an idea of its size.


This blanket project was made with Stitch Nation by Debbie Stoller a Bamboo Ewe yarn.  It's a worsted weight bamboo and wool.  The yarn is soft and warm.  The blanket is a decently heavy weight even though the granny patchwork is not a densely hooked blanket.  It was hooked with a size G.

The blanket has 110 square of 5 rounds in each granny square.  I used the JOIN AS YOU GO method as shown on Lucy's blog at Attic24.

For the finished edging, I had to use the remaining balls of wool that could make it all the way round the blanket so I didn't have a lot of design freedom.  There are several rows of granny stripe followed by a bit of a linen stitch in single crochet.  I didn't follow a specific pattern for the edging - just winged it as I thought the yarn would last.

The overall color pattern was as random as I could make it.  I tried not to have a pattern at all and tried to space colors randomly to give the blanket a bright color mix.  The colors I used were: Twilight, Mermaid, Buttercup, Eucalyptus, Geranium, Periwinkle, Mercury, and Sprout - 2 blues, 3 greens, a red, yellow and grey.  I just wanted something bright and happy to liven up my living room.  This blanket will hang out with us on the couches as we snuggle in the living room.

What you can't see on the photos above is.....




Now I don't feel quite so bad that I have started a new ripple blanket since the granny patchwork has gotten its due! See the RIPPLE BLANKET PROGRESS here.
There is still the matter of a few ends to weave in!  Happy blanket snuggling where you are!

Thursday, September 13, 2012

Bunting Baby Bunting

I think I could sit and crochet buntings ALL DAY.  My new faves are triangle granny buntings.  There are a lot of bunting patterns out there.  My favorite was posted here: BUNNY MUMMY.

I made one change to the pattern on my last round.  I did a total of five rounds.  I used three colors for my triangle bunting flags.  Not one color combination is the same in any of the flags in the strand.  On the last round, instead of 3 dc (American Crochet), chain 3 and 3 dc in the corner, I did 3dc, 3tc, 3 dc.

You can see the altered corner at the bottom of the triangle pictured here.

Here are some more photos of the Red, White and Purple bunting.



 
 
This bunting was a gift for my son's girlfriend to decorate her dorm room.

Another bunting I made was for my daughter's birthday.  For this bunting, I used turquoise, yellow and green solids and a variegated yarn.  This bunting also has five rounds in each triangle flag.

 

I also used a different method to hook together the triangles.  I've written a photo tutorial for my method of crocheting the flags together.

The pattern for joining the triangles into a bunting is this:

Chain 15.  Join with a slip stitch to the first chain to form a circle.


Chain 20 more.


With the triangle pointing down, make 2sc in the top right corner (ch 3 space) of the first triangle.

 
 
Chain 3 then sc in the next chain space.
 
 
 
Chain 3 again and sc in the next chain space.
 
Chain 3 again and 2sc in the top left corner (chain 3 space).
 
 
Chain 10 to 20 stitches depending on how far apart you want your bunting flags to be.
 
 
Continue the same pattern across the top of each triangle flag until all the triangles are attached.  Then, chain 35.  Slip stitch into the 15th chain from the hook and finish off.  Weave the ends into the chain stitches that make up the beginning and end circle loops.
 
The circle loops at each end make it easy to hang the bunting.
 
Here's how the bunting looked when it was all done:
 



 
 
Another bunting I made was a "baby" bunting.  It only had three rounds.  I used a combination of three colors, white, pink and green.  This bunting was for the baby of a friend.
 
Here are a few photos of that bunting:
 
 
 
I have plans for many more buntings.  They are fun to make and they work up very fast.
 
If you have favorite crochet bunting patterns, consider posting them to my FACEBOOK page.
 



Thursday, July 19, 2012

Another Easy Scarf Pattern in Crochet

I loved the Skinny Spring Scarf so much that I created an even skinnier one for summer.  I also chose a really brightly colored variegated cotton yarn to celebrate the happy, sunny season.

This scarf is just as fast and easy as the spring scarf and again, takes just one skein of Lily-Sugar and Cream cotton yarn.



The instructions in pdf can be found on Ravelry as a FREE download.  Click this link to go to the Ravelry pattern.

Here's what the pdf download pattern looks like. 


As always, my patterns are shared with you freely, so please don't ever sell them.  Also - link back to my blog if you share this post.  AND if you make the super skinny summer scarf - I'd love to have you share YOUR version!

Next up - I created THREE purse patterns... once I get them written up, I'll share those too.
Related Posts Plugin for WordPress, Blogger...